View HFA06TB120PBF_4113458.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD-95734
HFA06TB120PBF
HEXFRED
TM
Ultrafast, Soft Recovery Diode

Features
Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free
BASE CATHODE
4
VR = 1200V VF(typ.)* = 2.4V IF(AV) = 6.0A Qrr (typ.)= 116nC
2
Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor Higher Frequency Operation Reduced Snubbing Reduced Parts Count
Benefits
1 CATHODE
3 ANODE 2
IRRM(typ.) = 4.4A trr(typ.) = 26ns di(rec)M/dt (typ.)* = 100A/s
Description
International Rectifier's HFA06TB120 is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 1200 volts and 6 amps continuous current, the HFA06TB120 is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA06TB120 is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.
TO-220AC
Absolute Maximum Ratings
VR IF @ TC = 100C IFSM IFRM P D @ TC = 25C P D @ TC = 100C TJ TSTG Parameter Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max. 1200 8.0 80 24 62.5 25 -55 to +150 Units V A
W
C
* 125C
www.irf.com
1
10/18/04
HFA06TB120PBF
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
Parameter VBR Cathode Anode Breakdown Voltage VFM Max. Forward Voltage IRM Max. Reverse Leakage Current CT LS Junction Capacitance Series Inductance 2.7 3.5 2.4 3.0 3.9 2.8 A pF nH V IF = 6.0A IF = 12A IF = 6.0A, TJ = 125C VR = VR Rated TJ = 125C, VR = 0.8 x VR RatedD R VR = 200V
Rated
Min. Typ. Max. Units 1200 V
Test Conditions IR = 100A
0.26 5.0 110 500 9.0 8.0 14
Measured lead to lead 5mm from pkg body
Dynamic Recovery Characteristics @ TJ = 25C (unless otherwise specified)
Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Peak Rate of Recovery Current During tb Reverse Recovery Charge Peak Recovery Current Reverse Recovery Time Min. Typ. Max. Units 26 53 87 4.4 5.0 116 233 180 100 80 130 8.0 9.0 320 585 A/s nC A ns Test Conditions IF = 1.0A, dif/dt = 200A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C dif/dt = 200A/s VR = 200V IF = 6.0A
Thermal - Mechanical Characteristics
Parameter Tlead RthJC RthJA RthCS Wt Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Weight Min. Mounting Torque 6.0 5.0
0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount Mounting Surface, Flat, Smooth and Greased
Typ. 0.5 2.0 0.07
Max. 300 2.0 80 12 10
Units C
K/W
g (oz) Kg-cm lbfin
2
www.irf.com
HFA06TB120PBF
100
1000
TJ = 150C
100
Reverse Current - IR (A)
125C 100C
10
1
25C
10
Instantaneous Forward Current - IF (A)
0.1
0.01 0 200 400 600 800 1000 1200 1400
Reverse Voltage - VR (V)
100
1
Junction Capacitance - CT (pF)
T = 150C J T = 125C J T = 25C J
T = 25C J
10
0.1 0 2 4 Forward Voltage Drop - VFM (V) 6
1 1 10 100 1000 10000
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
Fig. 1 - Typical Forward Voltage Drop Characteristics
10
Thermal Impedance ZthJC (C/W)
1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance)
PDM
t1 t2
0.1
Notes: 1. Duty factor D = 1 / t t2 2. Peak TJ = PDM x ZthJC + T C
0.01 0.00001
0.0001
0.001
0.01
0.1
1
10
100
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
www.irf.com
3
HFA06TB120PBF
110 100 90 80
trr - ( nC )
IF = 6 A IF = 4 A
25
20
VR = 200V TJ = 125C TJ = 25C
IF = 6 A IF = 4 A
15
Irr - ( A)
70 60 50 40 30 20 100
dif /dt - (A/s ) Fig. 5 - Typical Reverse Recovery Vs. dif /dt
VR = 200V TJ = 125C TJ = 25C
10
5
1000
0 100
dif /dt - (A/s )
1000
Fig. 6 - Typical Recovery Current Vs. dif /dt
1000
VR = 200V TJ = 125C TJ = 25C
10000
800
IF = 6 A IF = 4 A
Qrr - ( nC )
600
400
di(REC) M/dt - (A/s )
1000
IF = 6 A IF = 4 A
100
VR = 200V TJ = 125C TJ = 25C
200
0 100
dif /dt - (A/s )
1000
10 100
1000
Fig. 8 - Typical Stored Charge vs. dif /dt
dif /dt - (A/s ) Fig. 7 - Typical di(REC) M/dt vs. dif /dt
4
www.irf.com
HFA06TB120PBF
REVERSE RECOVERY CIRCUIT
VR = 200V
0.01 L = 70H D.U.T. D dif/dt ADJUST G IRFP250 S
Fig. 9- Reverse Recovery Parameter Test Circuit
3
IF 0
trr ta tb
4
Q rr
2
I RRM
0.5 I RRM di(rec)M/dt 0.75 I RRM
5
1
di f /dt
1. dif/dt - Rate of change of current through zero crossing 2. I RRM - Peak reverse recovery current
4. Qrr - Area under curve defined by t rr and IRRM
trr X IRRM 3. trr - Reverse recovery Qrr = time measured from zero 2 crossing point of negative going IF to point where a line 5. di(rec)M /dt - Peak rate of passing through 0.75 IRRM change of current during tb and 0.50 I RRM portion of trr extrapolated to zero current
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
HFA06TB120PBF TO-220AC Package Outline
Dimensions are shown in millimeters (inches)
TO-220AC Part Marking Information
PART NUMBER EXAMPLE: T HIS IS A HFA06T B120 LOT CODE 1789 ASS EMBLED ON WW 19, 2001 IN THE AS SEMBLY LINE "C" INT ERNAT IONAL RECT IFIER LOGO DAT E CODE ASSEMBLY LOT CODE P = LEAD-F REE YEAR 1 = 2001 WEEK 19 LINE C
PART NUMBER EXAMPLE: T HIS IS A HFA06T B120 LOT CODE 1789 AS SEMBLED ON WW 19, 2001 IN T HE ASS EMBLY LINE "C" INT ERNAT IONAL RECT IFIER LOGO DAT E CODE AS SEMBLY LOT CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE
6
www.irf.com
HFA06TB120PBF
Ordering Information Table
Device Code
HF
A
06
TB
120
1
2
3
4
5
1 2 3 4 5
- Hexfred Family - Process Designator A = subs. elec. Irrad. B = subs. Platinum - Current Rating - Package Outline - Voltage Rating (06 = 6A) (TB = TO-220, 2 Lead) (120 = 1200V)
Note: "PbF" suffix at the end of the part number indicates Lead-Free.
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 10/04
www.irf.com
7

▲Up To Search▲

Price & Availability of HFA06TB120PBF

	To Download HFA06TB120PBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .